There are many products, which need to be preserved at a specific temperature to maintain their freshness. Refrigerated vehicles play a vital role in protecting products like seafood, poultry, flowers, meat, and even ice cream during transportation. The receiver of these products wants their delivery at a specific temperature.

If the proper temperature is not maintained, it will not be acceptable for the client and the transporter. There are many technicalities that the transporter has to keep in mind while he is in this service.

Different products have different and specific temperature requirements. If this is not maintained, the client can refuse to accept the delivery. It will lead to unsatisfied customers, going back to the warehouse for another set of products, and finally wastage.

The transport manager has to keep all these important factors in mind. Refrigerated vehicles are the lifeline for the transportation of perishable goods. Click here if you want to get more information on refrigerated vehicles and their customizations.

Let’s now discuss the blunders that should be avoided while building a refrigerated vehicle:

1. Never Underestimate the Importance of Insulation

The refrigerated truck requires a proper insulation wall. There cannot be any compromise to reduce the thickness of the insulation wall.  As even 2 inches reduction can result in improper maintenance of the temperature. Insulation plays a vital role in keeping the products at their right frozen temperature.

2. Choosing the Correct Back Door

You have the option to choose between a hinged gate or a roll-up gate for the vehicle. The right type of door makes loading and unloading easy.  The roll-up gate option can lead to a loss of value for the insulation wall. The best option would be to fix a hinged gate to maintain the performance of insulation.

If there are many stops for the refrigerated trucks for delivery, roll-up the gate can become an expensive option. It is because the door might not be able to save a lot of cool air within the storage. The consequence is too much pressure on the freezing unit.

The cost of the operation will increase, and there will be issues in controlling the temperature as the insulation loses its value.

3. Missing of the Interrupt Switches

The blower makes the cold air breakout each time the back gate of the refrigeration assembly opens. It also takes the humid and hot air inside the unit. It leads to underperformance because the refrigerated unit comes under immense stress. The answer to avoiding this is the power interrupt switch.

The Interrupt switch specification will shut down the blower. In this way, the cool air remains in the unit, and there is no entry for the humid air. It keeps the box at its ideal temperature for the whole day.

4. Don’t Overlook the Significance of Airflow

The refrigerated box with improper airflow cannot match the ideal cooling temperature, which can ruin the consignment. The body should be designed in such a way that it provides adequate airflow on the products from every corner.

An essential factor that determines the ideal airflow is flooring selection. The products are loaded boxes, crates, or other containers that determine the best-suited floor. The body manufacturer can give you an idea of the ideal specification of the vehicle floor.

5. Bringing Down in Initial Cost

Most of the transport managers aim at spending fewer amounts upfront.  This way, they end up saving costs by not investing in an ideal insulation box. This saving will only result in higher operating costs and can also impact the box life.

The transport managers don’t analyze the proper usage of the vehicle. They only aim to cut down costs, but the final result is the higher operating cost of the refrigerated vehicle.

6. Vehicle Chassis and Body Requirement Goes Hand in Hand

Many managers make the common mistake of buying a chassis that does not even fit the height of the frame. The body maker will not fix the box properly as the vehicle height exceeds the overall requirements.

To avoid this, the manager of the fleet company should coordinate well between the body and the chassis maker. It will ensure good communication between both parties.

The agreement of buying the vehicle should be signed only when there is compatibility between them.

Understanding the Industry Completely

A thorough study should be done by the transport company, as it is not a one-time expenditure.  All important information which impacts this transportation business should be studied minutely. Explore all the specification options deeply so that there are no obstacles in the transport procedures.

The manager should keep an eye on any technological enhancement that is happening in the industry. It can add value to the existing business operations. The correct information will result in choosing an ideal specification with the best budget in mind.