The essential things that you would need to start a fabrication or welding shop.
1. Working Place:
First of all, you need to have a place to work at comfortably. You can start your welding workshop anywhere. You can start it in your garage, in your backyard, in your garden,etc.
2. Working Table:
The second thing is that you must have a table with some metals surface on it. Some people also use their wooden workbench and have a piece of metal at the top of it. The wood probably burns out of the metal gets too hot. So, you must avoid it. A whole metal table gives you a smooth flat surface for your work.
3. Welding Machine:
Next, you must have a welder. You can sue the type of welder as per your requirement. It could be the one that runs without gas and also the ones that run entirely on gas. The price may vary with the features. So, you can buy the one that suits your budget. The one that runs on gas is much easier to learn as a beginner. Also, it is excellent for the thinner metals. While the other types of welders need a little more skills to run it correctly, theyare used for the welding of thicker metals. It can also work outside in the wind. However, the one that runs on gas, the wind screws up the welding. It also needs more power than the other welders.
4. Helmet:
So, when you are welding, you must have a mask. You have to have a helmet with a dark shade on it. A lot depends on your eyes. Also, it depends on whether you are working inside or outside. The process that you are using for the welding is another factor to consider while choosing the color of thehelmet. There are many types of masks.
5. Welding Gloves:
When you get the elder and the helmet, you got to have the welding gloves also because you are working with really hot metals. Mostly Megan Gloves are used by welders because they are insulated very well. They save your skin from any damage during the welding.
You can sue the lighter gloves when you are otherwise working, such as, while cutting the metals, drying them,etc. You can protect your hands during that.
6. Measuring Device:
The next thing that you need is the measuring devices, such as, yardstick, string, etc. You can use any of them that you need. You must use the one that you have rather than buying the new ones.
7. Markers:
You also need some markers. You can use it for marking the metal. You can get it at the welder supply store. You can also use apen or a pencil if you do not find the marker.
8. Leveler:
A leveler is also needed to keep everything straight and smooth while working. Some levelers have amagnet on them so that you can stick them anywhere you need them.
9. Clamps:
If you want to keep the pieces together while working on them, you can grab small large and small things through them. There are tons of different style of clamps on the market.
10. Ball Peen Hammer
You would always need a hammer at some point during Pro Fabrication and welding. A decent sized hammer is all that you need.
You can improvise, whatever you need and whatever you have.
Comments